Category: Blog

Printing Plate Roller: These 5 Points Must Be Done! As the saying goes, the quality of printed matter is “three points in printing, seven points in plate making.” Therefore, the

Plate Rollers, Plates And Overprinting In the printing world, it is often said that the seven-point edition is printed in three parts. It can be seen that a set of

Dry Goods丨6 Tips, Do A Good Job Of Color Correction In The Gravure Process Gravure printing, referred to as gravure, is one of the four major printing methods. Its printed

Laser engraving ceramic mesh roller requires a high level of precision to ensure the quality of the roller. In this guide, we have put an ideal processing process of ceramic

The making of the printing plate is a very crucial step of gravure printing. Some years backs, the printing plates were made manually. The images or the letters would be

In the printing industry, especially gravure printing, plate roller is very crucial. This is one component that is key in determining the quality of the printing. If the plate cylinder’s

The engraving technology is making printing technology more efficient, improving the making of images. This was one of the most demanding stages. You needed to design, make cuts and do

The issue of the depth of the electronic plate-making engraving is one of the widely discussed in the printing industry. It is equally one of the most misunderstood topics. Most

Indented printing is one of the engraving techniques of printing. The printing method works by using a mechanically made mold pressed on the substrate’s surface. This leaves a permanent indent

Electronic engraving is widely used in the printing industry because of the numerous benefits it offers. Unlike laser engraving technology, this type of engraving uses a diamond stylus to engrave